Show IMEI code

What's the IMEI code of your phone, simply press:

* # 06 #

you'll read it on display.

This codes shows you software version,

software date and hardware model number of your phone.

On 2110, type:

* # 9999 #

On 2110i, may function one of the followings:

* # 170602112302 # or

* # 682371158412125 #

To get the manufacturing date of your phone, press:

* # 3283 # (= *#date#)

in 1995 phones, date is in "mmyy" format, 1996 an

d later phones show date in "wwyy" format.

Here is a way to Unlock your phone which is Service

Provider locked, without to know SPLock code !!!!

Give it a try

Turn the phone on, when the phone asks

for the Security Code,

press:

112

now quickly press:

#

send

end

send

end.

Each time you turn your phone OFF it resets the lock,

so this need to be done each time you'll turn your phone ON

Anyway it's better than nothing, isn't it?

What's the IMEI code of your phone, simply press:

* # 06 #

you'll read it on display.

This code shows you software version, date of

manufacture and hardware model number of your phone.

* # 3110 #

To get additional information from your phone you can use the so called

"warranty codes", try typing:

*#92702689# (= *#war0anty#).

You will be asked a 'warranty code:'

type:

6232 (OK) : To display the Month and Year of Manufacture.

7332 (OK) : To display the date of the last repairment.

7832 (OK) : To display (if previously set) the date where the phone was purchased.

9268 (OK) : To display the Serial Number.

37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)

87267 (OK) : To Confirm Transfer

To check if the Sim-Clock can be stopped type:

*#746025625# (= *#sim0clock#)

To restore factory settings (This does not include memory, language and counters) type:

*#7780#

If you want to inquire your phone about SPlock, you

can use the following:

# pw + 1234567890 + [y] #

If you put your hands on your 10 digits SPlock code

yet, then you can modify the status of the above

results, typeing:

# pw + [mastercode] + [y] #

where: [y] is 1 up to 4, and

any ten digits number seems working instead of

"1234567890"

Here is a way to Unlock your phone which is Service

Provider locked,

without to know SPLock code !!!!

Give it a try:

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display

* and hold until start to blink

* and hold until start to blink

04* * *your pin>#

Each time you turn your phone OFF it resets the lock,

so this need to be done each time you'll turn your phone ON

Anyway it's better than nothing, isn't it?

Want to use your laptop to send fax and data with your

3110's Nokia Phone ?

Using the Nokia Data Suite you'll be able to do this and

much more ...!!

What's the IMEI code of your phone, simply press:

* # 06 #

you'll read it on display.

Half Rate Codec will decrease sound quality but it gives

you about 30%

lower battery consumption.

You may enable it by this code:* 4720 #

or disable it:# 4720 #

To check if the Sim-Clock can be stopped type:

*#746025625# (= *#sim0clock#)

If you want to inquire your phone about SPlock, you

can use the following:

# pw + 1234567890 + [y] #

If you put your hands on your 10 digits SPloock code yet,

then you can modify the status of the above results, typeing:

# pw + [mastercode] + [y] #

where:

[y] is 1 up to 4, and

any ten digits number seems working instead

of "1234567890"

What's the IMEI code of your phone,

simply press:

* # 06 #

you'll read it on display.

This code shows you software version, date of

manufacture and hardware model number of your phone.

* # 0000 #

To get additional information from your phone you can

use the

so called "warranty code", try typing:

*#92702689# (= *#war0anty#).

Now you are in service menu where you'll find:

1 IMEI (International Mobile Equipment Identification)

2 Made MM/YY (date of production of the phone mm/yy)

3 Purchasing Date (here you can enter the date of purchase.

If you enter an incorrect date, you cannot correct it later !

4 Repaired (date of repair, if there was one)

5 Transfer user data?

*3370# EFR will be activated after a reboot of the phone ( consumes more power )

#3370# EFR will be switched off after a reboot of the phone.

*4720# Half Rate coded will be activated after a reboot of the phone ( better standby time )

#4720# Half Rate coded will be de-activated after a reboot of the phone

If you press the "Power on"

button for a short moment, the menu with the profiles is

shown on the display.

If you press one more time,

the mobile turns itself off.

You can use the up and down cursor keys to scroll and

enable a different alert setting.

Here is a way to Unlock your phone which is Service

Provider locked,

without to know SPLock code !!!!

Give it a try:

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display

* and hold until start to blink

* and hold until start to blink

04* * *your pin>#

Each time you turn your phone OFF it resets the lock,

so this need to be done each time you'll turn your phone

ON Anyway it's better than nothing, isn't it?

What's the IMEI code of your phone,

simply press:

* # 06 #

you'll read it on display.

This code shows you software version, date of manufacture

and hardware model number of your phone.

* # 0000 #

if the above won't work, try this one too:

* # 6110 #

To get additional information from your phone

you can use the so called "warranty codes", try typing:

*#92702689# (= *#war0anty#)

now you can just scroll through the information like in

any other menu.

If it won't work and the phone ask you for a 'warranty code:' try:

6232 (OK) : To display the Month and Year of Manufacture.

7332 (OK) : To display the date of the last repairment.

7832 (OK) : To display (if previously set) the date where the phone was purchased.

9268 (OK) : To display the Serial Number.

37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)

87267 (OK) : To Confirm Transfer

*3370# EFR will be activated after a reboot of the phone ( consumes more power )

#3370# EFR will be switched off after a reboot of the phone.

Someone reported us that some Nokia 6110 remain

dead if you run out of battery while the phone has its keyboard locked.

Nokia seems to be aware of this bug and

hopefully will be correct in next software version (6110i maybe ??).

If you press the "Power on"

button for a short moment, the menu with the profiles is shown on the display.

If you press one more time,

the mobile turns itself off.

You can use the up and down cursor keys to scroll and

enable a different alert setting.

What's the IMEI code of your phone,

simply press:

* # 06 #

you'll read it on display.

This code shows you software version, date of manufacture

and hardware model number of your phone

. * # 8110 #

To get additional information from your phone

you can use the so called "warranty codes", try typing:

*#92702689# (= *#war0anty#)

now you can just scroll through the information like in any other menu.

If it won't work and the phone ask you for a 'warranty code:' try:

6232 (OK) : To display the Month and Year of Manufacture.

7332 (OK) : To display the date of the last repairment. 7832 (OK) : To display (if previously set) the date where the phone was purchased.

9268 (OK) : To display the Serial Number.

37832 (OK) : To set the Purchasing Date MMYY (Warning: You can only do this once)

87267 (OK) : To Confirm Transfer

To check if the Sim-Clock can be stopped type:

*#746025625# (= *#sim0clock#)

1 - Charger/System Ground

2 - Accessory Output Supply. (3.4V...10V - 50mA)

3 - External Microphone Input and Accessory Identification *1,7...2,05 V Headset Adapter Connected *1,15...1,4 V Compact Handsfree Unit Connected *2.22...2.56 V Infra Red Link Conneceted

4 - External RF Control Input *0...0.5V External RF in use *2.4...3.2V Internal Antenna in use

5 - FBUS Transmit

6 - Serial Control Bus

*Logic Low Level: 0....0.5V

*Logic High Level:2.4V....3.2V

7 - Not Connected

8 - Signal Ground

9 - External Speaker and Mute Control Mute ON (HF SPEAKER MUTE ):0...0,5 V d.c. Mute OFF (HF SPEAKER ACTIVE ): 1,0...1,7 V d.c.

10 - Hook Signal *Hook Off (Handset in Use): 0....0.5V *Hook On (Handset in Use): 2.4V....3.2V

11 - FBUS Receive

12 - Charging Supply Voltage (Max 16V)

Here is a way to Unlock your phone which is Service

Provider locked, without to know SPLock code !!!!

Give it a try:

First of all, PIN CODE MUST BE ON, then press:

C

C and hold until it clears display

* and hold until start to blink

* and hold until start to blink

04* * *your pin>#

Each time you turn your phone OFF it resets the lock,

so this need to be done each time you'll turn your

phone ON

Anyway it's better than nothing, isn't it?

What's the IMEI code of your phone,

simply press:

* # 06 #

you'll read it on display.

This code shows you software version, date of manufacture

and hardware model number of your phone.

* # 0000 #

To get additional information from your phone

you can use the so called "warranty codes", try typing:

*#92702689# (= *#war0anty#)

You'll get the following:

serial nunber

manufacture date

the date of purchase (if entered)

the date of the last repairment

transfer user data

To check if the Sim-Clock can be stopped type:

*#746025625# (= *#sim0clock#)

What's the IMEI code of your phone,

simply press:

* # 06 #

you'll read it on display.

This code shows you software version of your Communicator:

*#682371158412125#

This code shows you the manufacturing date of your

Communicator:

*#3283# (or *#DATE#)